«About» «Order, Payment & Shipment» «Mailing List»


13.56Mhz RFID Card  (S50 Mifare)

Key Features:
Operating Frequency: 13.56Mhz
Operating Distance: Up to 100mm depending on antenna geometry
Fast Data Transfer: 106kbps
High Data Integrity: 16bit CRC, parity, bit coding, bit counting
True Anticollision
Typical Ticketing transaction: <100ms (including backup management)
EEPROM: 1KByte
EEPROM data organized in 16 sectors of 4 blocks with 16bytes each.
Data Retention: 10 Years
Write Endurance: 100 000 cycles
Unique Serial number for each Card
Dimensions: 85x54mm; 1mm Thick
RFID Reader Writer available here.

SGD$3.50 each.
Price is for 1 (ONE) S50 Mifare card.

Detailed Information: 
S50 Mifare Card Datasheet
30 Jul 2011
13 notes
ICSP Connector
This is an ICSP Connector that comes in really useful when you need  to connect to an ICD Programmer and the programming pins are all over  the place.

Key Features:
Phone Jack Connector to 5 0.1” Individual Standard Header Connector
Connector Length: ~10cm   
White: MCLR
Red: VDD
Black: GND
Green: PGC
Blue; PGD

Note: ICD3 shown in image not included.
Unit Price: SGD$4.50
30 Jul 2011
49 notes
1.6” TFT LCD Display Set

This is a 1.6” TFT LCD Display Module Set.

Key Features:
Uses LCD Display: H161T01
Resolution: 130x130 pixels
Controller IC: Solomon SSD1283
Interface: SPI
Board Dimensions: 50 x 36mm
Board Pinout: VDD, RST, D/C, CS, SDATA, SCLK, GND
What’s in the package:
1x 1.6” TFT LCD Display
7x Jumper Wires (20cm)
Unit Price: SGD$28.00 per set

Detailed Information: 
 H161T01 Datasheet
Solomon Controller IC Datasheet (SSD1283)
30 Jul 2011
4 notes
13.56Mhz RFID Module Kit Set
This is a 13.56Mhz RFID Kit Set consisting of the RFID Module, 3 RFID Mifare Cards and Jumper Wires.

RFID Module Features:
Detachable Antenna
Communication Interface: UART (Serial); 9bit Addressing, 8bit Data
Default Baud Rate: 19200bps
Automatic Scanning for RFID Card (Status Reflected in dedicated pin)
Operational Scanning Distance: 30~50mm
Low Power Consumption: 3.3V, 32mA (Operational)
Uses MFRC522 as RF base station
Compliant with ISO14443 TYPE-A Standards
Compatible RFID Cards for use with this module: Mifare S50, S70, SAM9600, SAM38400
Working temperature: -25~+85 
Dimension inclusive of antenna: 43.5X35.5mm
Dimension without antenna: 25X15.6mm
What’s in the package:
1x 13.56MHz RFID Module
3x S50 Mifare (1K) RFID Cards
6x Jumper Wires (20cm)
*Additional RFID Cards available here.
Unit Price: SGD$65.00

Detailed Information: 
13.56MHz RFID Module Datasheet
S50 Mifare Card Datasheet
30 Jul 2011
4 notes
BasicX24P-U
This is a BasicX24P-U Industrial Module (RoHS) Microcontroller by NetMedia Inc.

Some Quick Specs:
Speed: 83,000 Basic instructions per second
EEPROM: 32K bytes (User program and data storage)
Max program length: 8000+ lines of Basic code
RAM: 400 bytes
Available I/O pins: 21 (16 standard + 2 serial only + 3 accessed outside standard dip pin area)
Analog Inputs (ADCs): 8 (8 of the 16 standard I/O pins can individually function as 10bit ADCs or standard digital I/Os or a mixture of both)
Serial I/O speed: 1200 - 460.8K Baud
Floating point math: 32bit x 32bit floating point math built-in
Programming interface: High speed Serial
Physical Package: 24 pin DIP module
Detailed Information:
BasicX-24 Description
BasicX-24 Technical Specifications
BasicX-24 Application Notes
BasicX-24 Development Kit
BX-24 Programming Connections
BasicX-24 Comparisons
Unit Price: SGD$95.00
(Educational Instituitions get 5% discount)
25 May 2011
0 notes
FI40 Microcontroller Board
The FlamingICE™ Family Series is AIS Cube’s line of microcontrollers  whose core is a high performance, 16 bit Digital Signal Processor,  running on the FlamingICE Operating System (FIOS) at 20 MIPS (million  instructions per second).
The Core is based off the dsPIC30F series of chips by Microchip,   making full use of its high-speed I/O toggling rates and superb  peripheral control.
Key Features:
Standard Gold Pins Headers for I/Os in the format of Gnd|Vdd|IO|IO
3pin Headers for Servo Motors
Plug-and-Play Ready for Emodules
Onboard Voltage Regulator
Power Indicator
Reset Button
User Programmable LED and PushButton Onboard
2 UART JST ports
Brief Technical Specifications:
Operating System: FlamingICE
Clock: 40MHz
Power Supply: 6 - 9V DC
Operating Voltage (Regulated):    5V
I/O Sink/Source Current:    25mA
Range:    16bit
Pins:    40
Speed: 20 MIPS (million instructions per second)
Physical I/O Pins: 23
User Memory: 20KBytes
UART : 2
ADC Pins : 13
ADC Resolution : 12bit
PWM Pins : 4SPI :    1
Programming Interface:    Serial RS232 (USB to UART)
IDE: FIDE
Programming Language : VBasic-minor
Detailed Information:
Documentation
Resources/Tutorials
Unit Price: SGD$140.00
25 May 2011
0 notes
FI40 Chip
This is an FI40 Chip DIP Package. Great if you need to replace the one on your Microcontroller Board, or for doing experiments on a breadboard.
The FlamingICE™ Family Series is AIS Cube’s line of microcontrollers     whose core is a high performance, 16 bit Digital Signal Processor,     running on the FlamingICE Operating System (FIOS) at 20 MIPS (million     instructions per second).
The Core is based off the dsPIC30F series of chips by Microchip,      making full use of its high-speed I/O toggling rates and superb     peripheral control.
Brief Technical Specifications:
Operating System: FlamingICE
Clock: 40MHz
Power Supply: 6 - 9V DC
Operating Voltage (Regulated):   5V
I/O Sink/Source Current:  25mA
Range:  16bit
Pins:  40
Speed: 20 MIPS (million instructions per second)
Physical I/O Pins: 23
User Memory: 20KBytes
UART : 2
ADC Pins : 13
ADC Resolution : 12bit
PWM Pins : 4
SPI :  1
Programming Interface: Serial RS232 (USB to UART)
IDE: FIDE
Programming Language : VBasic-minor
Detailed Information:
Documentation
Resources/Tutorials
Unit Price: SGD$40.00
25 May 2011
0 notes
FI28 Chip
This is an FI28 Chip DIP Package. Great if you need to replace the one  on your Microcontroller Board, or for doing experiments on a breadboard.
The FlamingICE™ Family Series is AIS Cube’s line of microcontrollers    whose core is a high performance, 16 bit Digital Signal Processor,    running on the FlamingICE Operating System (FIOS) at 20 MIPS (million    instructions per second).
The Core is based off the dsPIC30F series of chips by Microchip,     making full use of its high-speed I/O toggling rates and superb    peripheral control.
Brief Technical Specifications:
Operating System: FlamingICE
Clock: 40MHz
Power Supply: 6 - 9V DC
Operating Voltage (Regulated):   5V
I/O Sink/Source Current:    25mA
Range:    16bit 
Pins:    28
Speed: 20 MIPS (million instructions per second)
Physical I/O Pins: 12
User Memory: 20KBytes
UART : 1
ADC Pins : 5
ADC Resolution : 12bit
PWM Pins : 2
SPI :    1
Programming Interface:    Serial RS232 (USB to UART)
IDE: FIDE
Programming Language : VBasic-minor
Detailed Information:
Documentation
Resources/Tutorials
Unit Price: SGD$28.00
25 May 2011
0 notes
EBlue Bluetooth Module Pair

This is a pre-paired set of EBlue Bluetooth® Module that is meant for use as a Wireless Serial Bridger.

Key Features:
Based on CSR (Cambridge Silicon Radio) BlueCore4 Chipset; BC417143B-IRN-E4
Low Power 3.3V Operation
Onboard Antenna
Class 2 
Bluetooth® Spec v2.0 + EDR Compliant
Master/Slave Operation
Pre-paired
Drop-in replacement for wired serial connections
Guaranteed 10 meters transmission range
RoHS Compliant
Fixed Baud Rate Settings: 115200bps, 8bit Data, 1 Stop Bit, No Parity, No Flow Control
Items in the set: 
2x Pre-paired EBlue Bluetooth® Modules
2x JST Bluetooth Connector
Module Dimensions: 4.7 * 2.6 cm
Detailed Information:
Schematics
EBlue User Manual
Unit Price: SGD$96.00 (per set)
23 May 2011
1 note
PL2303 USB To Serial TTL Converter

This is a USB to Serial TTL Converter.

Key Features:
Based on Prolific PL2303Hx chip
5V Operation
Driver support for Windows, Windows CE, MAC OS 8,9,X and Linux
Compact Shell Cover 
1 meter long cable
4 way JST connector (GND,TX,RX,DTR)
Those who require the use of VCC/CTS/RTS/RI/DSI etc. may open the   shell cover to locate required pads. (Disclaimer: No technical support   will be given should you need to modify this converter, Items sold are   meant to be used as-is)
PinOut:
GND = Black Wire TX = Yellow Wire RX = Green Wire DTR = Blue Wire

Items in the set: 
1x USB to RS232/UART Convertor 
Shell Dimensions: 1.7 * 5.5 cm
Detailed Information:
PL2303Hx Datasheet
Driver Download: Prolific Drivers
Driver Installation Instructions: Download Driver & Install BEFORE Plugging in the device!!!


Unit Price: SGD$28.00
23 May 2011
0 notes
USB to UART/RS232 Module
This is a Serial Communication Set, consisting of a USB to RS232/UART convertor and accompanying cables.

Great for those times when you need to communicate between an embedded UART to the PC through USB.

Note: You would need to get this if you’re getting the BlazingCore/FlamingICE Microcontroller Boards! The USB to RS232 Convertor is required to download programs from the PC to the BlazingCore & FlamingICE Microcontroller boards. 

Key Features:
Based on FTDI FT232RL chip
3.3V Operation
Royalty-Free Drivers (both VCP & D2XX) with support for Windows, MAC OS and Linux
Sleeve Protection
Items in the set: 
1x USB to RS232/UART Convertor 
1x Crossed JST Serial Cable
1x USB to Mini-B Cable 
Board Dimensions: 3.4 * 1.8 cm
Detailed Information:
Schematics
FT232RL Datasheet
Driver Download: FTDI Drivers
Driver Installation Instructions: Download Driver & Install BEFORE Plugging in the device!!!

Unit Price: SGD$48.00
23 May 2011
0 notes
C3038 CMOS Camera Module
The C3038 is a 1/4” color sensor module with digital output using OmniVision’s OV6630 CMOS image sensor, operating at 3.3V. Featuring new lenses (comes with a lens cap too) that provides a slightly wider angle of vision.
Items in the set: 
1x C3038 CMOS Camera
Detailed Information:
C3038 Camera Module 
Schematics
OV6630 Datasheet
Resources / Tutorials:
Frame Grabbing from Camera to OLED
BlazingCore Vision System Manual 
Unit Price: SGD$80.00

Get some jumper wires for use with this!
23 May 2011
2 notes
SD/MMC Module

Dimension: 4.7 * 3.0 cm
Onboard 5V to 3.3V Regulator
SPI Interface
All external circuitry required for the SPI Interface has been done, just get some jumper wires to connect to the SPI Bus on your Microcontroller and you’re good to go.
Push/Pull SD/MMC Socket
Features 2x M3 Mounting Holes
*SD Card Not Included!
What’s in the package:
1x SD/MMC Module
Detailed Information:
Schematics
Unit Price: SGD$25.00

Get some jumper wires for use with this!
23 May 2011
0 notes
VS1053B MP3 Audio Module

This  is an Audio Module based on VLSI’s VS1053B Audio Decoder, commonly used  to play MP3 and Wav Files fed to it over an SPI Interface.
Note: The BlazingCore Microcontroller Board has full native support for this module.
Key Features:
Based on VLSI VS1053B chip
Onboard Voltage Regulator provides the 3.3V that the chip requires
5V Power Supply
SPI Interface
Onboard Mic
Line-In
Audio-Out (To Earphones, or Speakers up to 1W/8ohms)
Items in the set: 
1x VS1053B Audio Module
Board Dimensions: 5 * 4 cm
Detailed Information:
Schematics
VS1053B Datasheet
Application Notes/More Documentations
Unit Price: SGD$65.00

Get some jumper wires for use with this!
23 May 2011
0 notes
GP2Y0A21YK0F Distance Measuring Sensor
The very popular GP2Y0A21YK0F is an analog distance measuring sensor by SHARP.
Distance Measuring Range: 10 - 80 cm
Analog Output
Dimension: 2.95 * 1.3 * 1.35 cm
Current Consumption: 30mA
Supply Voltage: 4.5 - 5.5V
Similar/Direct Replacement for GP2D12
What’s in the package:
1x GP2Y0A21YK0F Distance Measuring Sensor
1x JST 3 way Connector (as shown in the image above)

Detailed Information:
Datasheet
Unit Price: SGD$38.00
23 May 2011
1 note